Products

900 KORE Range

Back

Gas cookers with oven

• Funnelled surface tops, manufactured in 2 mm thick AISI-304 stainless steel.
• Laser-cut joints, automatic welding and polishes. Screws hidden from view.
• Hobs with dimensions 397 x 350 mm allowing the use of large pans and pots. The shortened distance between the central prongs, 75 mm, allows them to support pans with a very small diameter (8 cm). This also avoids the danger of small containers tipping over.
• The hobs are manufactured in RAAF enamelled cast iron (resistant to acid and alkali products, and to fire and high temperatures).
• Double crown burners and diffusers in nickel-plated cast iron, guaranteeing the even distribution of heat from the flame in the bottom of the pans, even large ones. This avoids the accumulation of heat at a single point and optimises the energy transfer of the product.
• Burners of different power ratings to adapt to the containers and their use with different foodstuffs: 5,25 kW (Ø 100 mm), 8,0 kW (Ø 120 mm), 10,2 kW (Ø 140 mm).
• Burners slot back in with no way of confusing their position.
• Low consumption pilots and thermocouples positioned within the body of the burner for greater protection.
• Gas conduction in flexible stainless steel tubes, making internal manipulation easier and facilitating any repair work.
• Controls set on a protective base with a system against water infiltration.
• High temperature enamelled cast iron flue protector aligned with the hobs, facilitating
• manoeuverability and supporting larger containers, increasing useful surface area.
• Access to the components from the front.
• Easy to use static GN 2/1 size oven or with dimensions 1000 x 700 x 290 mm (OP version cookers), with the controls positioned on the upper panel.
• Cooking chamber constructed entirely in stainless steel, making it easier to clean and providing better hygiene.
• Tray introduced sideways, making it easier to handle.
• Guides at three heights to offer different working options.
• Guides with “U” shape to prevent the trays from tipping.
• Temperature controlled by thermostatic valve (125 – 310 °C).
• Tubular stainless steel burner (two branches in OP version), with pilot and thermocouple, and piezoelectric ignition.
• Oven floor manufactured in 6 mm cast iron, guaranteeing better performance and even heat distribution.
• Fibreglass closing seal to improve the oven’s thermal efficiency.
• Dismountable oven door, facilitating repair.

OPTIONAL ACCESSORIES
• Plate to place over 5,25 kW burners.
• Water column.

Open burner models

  Model No of Burners Size of oven Power kW Dimensions (mm) Data sheet
C-G941 C-G941 4 GN-2/1 37,30 800x930x850 Download
C-G941 H C-G941 H 4 GN-2/1 42,80 800x930x850 Download
C-G961 C-G961 6 GN-2/1 50,55 1.200x930x850 Download
C-G961 H C-G961 H 6 GN-2/1 58,80 1.200x930x850 Download
C-G961 OP C-G961 OP 6 1000X700X290 57,95 1.200x930x850 Download
C-G961 OP H C-G961 OP H 6 1000X700X290 66,20 1.200x930x850 Download

Fry-top models

• 10 mm thick cast iron plate with rounded corners. 300 mm diameter surface.
• Refractory brick with cast iron shield inside to take better advantage of the heat and distribute it better.
• Temperatures for differentiated use: 500 °C at the centre and 200 °C near the edges.

  Model No of Burners Size of oven Power kW Dimensions (mm) Data sheet
C-G911 C-G911 1 GN-2/1 19,60 800x930x850 Download
Would you like more information? Contact us!
  • The Name and Surname field is obligatory.
  • The E-mail field is obligatory. Enter a valid e-mail address.
  • The telephone field is obligatory. The format of the number is incorrect. Please enter number again.
  • The Country field is obligatory.
  • The Query field is obligatory.
You must confirm acceptance of the privacy policy.
* Obligatory fields

The information has been sent. Thank you for contacting us. We shall study your request and reply as soon as possible.

Back

An error has occurred. Please try again.